KX-TDA200

Napajanje: Panasonic KX-TDA0103 (samo za kx-tda200), KX-TDA0104, KX-TDA0108, servis, popravka, popravak, servisiranje napajanja, prodaja.

Hybrid IP PBX System

The Panasonic KX-TDA200 Hybrid IP PBX offers an ideal solution
for your office in the Convergence age by efficiently handling voice
and telephony data, providing businesses with a low-cost intelligent
communications system, combined with a family of mobile and
business applications for up to 160 users.
Suitbale for Medium Enterprise and Hotels

The Panasonic KX-TDA200 Hybrid IP PBX provides businesses with a low-cost intelligent communications system, combined with a family of mobile and business applications for up to 160 users.

The KX-TDA200 is a hybrid IP PBX system that will fulfil customers' requirements today and into the future. It can be configured to meet present needs and expand as requirements grow or change. The KX-TDA200 combinies PBX reliability with IP technology, offering efficient and flexible communication.

The KXTDA200 cost effectively bridges the gap between telecom requirements today, and the demand for future integrated solutions.

Applications include ; Voicemail, Call Management Software, Cordless Telephony (DECT), Integrated Headsets, Computer Telephony Integration (CTI), Remote Branches and Home Worker Solution.

Characteristics

Terminal Equipment Loop Limit	PT: KX-T76xx series and KX-T7560/KX-T7565: 90 ?; all other DPTs/APTs: 40 ?; SLT: 600 ? including set; Doorphone: 20 ?; CS: 130 ?
Minimum Leakage Resistance	15000 ? maximum
Maximum Number of Extension Instruments per Line	1 for PT or SLT; 2 by Parallel or eXtra Device Port connection of a PT and an SLT
Ring Voltage	75 Vrms at 20 Hz/25 Hz depending on the Ringing Load
Trunk Loop Limit	1600 ? maximum
Hookswitch Flash Recall Timing Range	24 ms to 2032 ms
BRI Cards Internal ISDN Mode	Supply Voltage: 40 V; Power Supply: 4.5 W per 1 line, 10 W per 4 lines (BRI4); 4.5 W per 1 line, 20 W per 4 lines (BRI8); Power Supply Method: Phantom Power Supply
Door Opener Current Limit	24 V DC/30 V AC, 1 A maximum

General Data

Control Bus	Original bus (16 bit, 8 MHz,10 megabytes per second)
Communication Bus	H.100 bus conformity (1024 time slot)
Switching	Non Blocking Distributed Time Switch
Power Input
PSU-M	100 V AC to 130 V AC/200 V AC to 240 V AC, 2.5 A/1.4 A, 50 Hz/60 Hz
PSU-L	100 V AC to 130 V AC/200 V AC to 240 V AC,5.1 A/2.55 A, 50 Hz/60 Hz
External Battery	+36 V DC (+12 V DC x 3, battery capacity of 28 Ah or below recommended for 1 external battery)
Maximum Power Failure Tolerance	300 ms (without using backup battery)
Memory Backup Duration	7 years
Dialling
Trunk	Dial Pulse (DP) 10 pps, 20 pps; Tone (DTMF) Dialling
Extension	Dial Pulse (DP) 10 pps, 20 pps; Tone (DTMF) Dialling
Mode Conversion	DP-DTMF, DTMF-DP
Ring Frequency	20 Hz/25 Hz (selectable)
Trunk Loop Limit	1600 ? maximum
Operating Environment
Temperature	0 °C to 40 °C
Humidity	10%to 90% (non condensing)
Conference Call Trunk (per shelf)	From 10 x 3-party conference call to 4 x 8-party conference call
Music on Hold (MOH)	2 ports (Level Control: -6 dB to +6 dB in 3 dB steps); MOH1: External Music Source port; MOH2: Selectable Internal/External Music Source port
Paging
Internal	Level Control: -6 dB to +3 dB in 3 dB steps
External	2 ports (Volume Control: -15 dB to +6 dB in 3 dB steps)
Serial Interface Port
RS-232C	1 (max 115.2 kbps)
USB	1
Extension Connection Cable
SLT	1 pair wire (T, R)
DPT	1-pair wire (D1, D2) or 2-pair wire (T, R, D1, D2)
APT	2-pair wire (T, R, D1, D2)
DSS Console and Add-on Key Module	1-pair wire (D1, D2)
Dimension [mm]
Width	430.0
Height	415.0
Depth	270.0
Weight (when fully mounted)	Under 16 kg (35.2 lb)

KX-TDA200 Panasonic centrala KX-TDA200 Panasonic KX-TDA200 Panasonic KX-TDA200 Panasonic KX-TDA200 ORIGINAL Panasonic KX-TDA200 Panasonic KX-TDA200